STRATEGIC ANALYSIS

Should you use OM5 or Singlemode Optical Fibre?

How the shift to 800G, AI clusters, and Silicon Photonics has made Single Mode Fiber the only viable path for long-term scalability.

The growth in bandwidth and the explosion of cloud and AI have fundamentally changed the economics of the data center. While OM5 was designed to extend multimode’s life via SWDM, the superior physics, lower cable cost, and the rise of Silicon Photonics have established OS2 Single Mode as the universal standard for modern infrastructure.

Multimode Fiber (OM5)

  • ✕ Short-Reach Limit: Distance drops to 50–100m at 400G/800G speeds.
  • ✕ Modal Dispersion: Large 50µm core causes signal spreading and pulse overlap.
  • ✕ High Attenuation: 3.0 dB/km loss—roughly 10x higher than single mode.
  • ✕ Recabling Risk: Historically prone to obsolescence with every speed generation.

Single Mode Fiber (OS2)

  • ✓ Unlimited Reach: Supports distances >100km; 500m+ standard for data centers.
  • ✓ Zero Modal Dispersion: 9µm core restricts light to a single fundamental mode.
  • ✓ Low Loss: 0.35 dB/km @ 1310nm for superior signal integrity.
  • ✓ Future-Ready: 'One-and-done' investment supporting 1G to 1.6T and beyond.

Technical FAQ

+ Why is OM5 considered a 'dead-end' for 1.6T?
OM5 bandwidth limits and the high complexity of managing 16+ fibers in MPO connectors make it physically and economically difficult to scale beyond current 800G limits.
+ Is single mode more expensive?
While transceivers still carry a slight premium, the fiber cable itself is significantly cheaper. The market is rapidly closing the transceiver price gap.
+ What is the 'Recabling Penalty'?
The massive labor cost to replace obsolete multimode fiber. Single mode avoids this by supporting multiple generations of hardware on the same glass.
+ How does single mode benefit AI workloads?
Unlike multi-mode, it provides near-zero modal dispersion, resulting in predictable ’tail latency.’ This prevents synchronization delays that can waste GPU compute potential.
+ Can I use Single Mode for short runs (less than 10 meters or 3 feet)?
Yes. Modern transceivers have high dynamic ranges that prevent receiver saturation on short runs. Single mode is now used for everything from rack-to-rack patching to long-haul links. As always be cautious with long range optics, which can overpower receivers if used on too short of a length.
+ Is single-mode harder to install or clean than OM5?
While the core is smaller, modern fusion splicers and cleaning tools have automated the precision required. In fact, cleaning a single-fiber LC connector is much easier and more reliable than cleaning a 16-fiber MPO connector.
+ Does single mode help with power consumption?
Yes. Single mode facilitates Silicon Photonics and Co-Packaged Optics, which can reduce the power consumption of optical links by up to 30% compared to traditional multimode VCSEL drivers.
+ What is the impact of single mode on 'Stranded Capacity'?
Multimode often leads to stranded capacity because it cannot support newer, faster optics over existing distances. Single mode ensures 100% of your installed fiber can be utilized as you upgrade from 100G to 800G.
+ How does Single Mode simplify polarity management?
High-speed multimode often requires complex MPO Type-B or Type-C arrays to manage 8 or 16 fibers. Single mode typically uses simple Duplex LC connectors, making polarity straightforward and reducing installation errors.
+ Why is 'Bend-Insensitive' Single Mode (G.657.A1/A2) important for Enterprise?
In tight commercial closets and congested cable trays, macro-bends cause massive signal loss. Modern single-mode (G.657) allows for much tighter bend radii than multimode without significant attenuation, making it more resilient in ‘real world’ messy installs.
+ Does Single Mode support legacy speeds like 1G or 10G?
Absolutely. Single Mode is backwards compatible with almost every generation of networking. You can run 1G today and 800G tomorrow over the exact same single mode glass.
+ What role does Silicon Photonics (SiPh) play in the death of Multimode?
SiPh allows manufacturers to print optical components on standard silicon wafers. This process only works with Single Mode light. As SiPh scales, the cost of Single Mode transceivers is falling toward parity with Multimode, removing the last remaining reason to buy OM5.

Find out More

Don't get trapped in the multimode cycle. Consult with ScaleFibre to plan your Singlemode migration.

Get in Touch

Compare the cost of OM5 vs. single mode for your facility.

“
The age of the multimode data center is ending. By investing in single-mode today, organizations are securing a future-ready foundation for the next decade of digital innovation, from 800G to 3.2T.
Daniel Rose - Chief Executive Offer, ScaleFibre

Modern Single Mode Applications

Why single mode is the non-negotiable choice for 2026.

AI Training Clusters
AI Training Clusters

Minimizing cost and maximising bandwidth on a massive scale, across multiple geographies and regions globally.

Hyperscale and Colo DCs
Hyperscale and Colo DCs

Standardizing on a single fiber type to reduce SKUs and eliminate the 'Recabling Penalty' of continued capital investment

Commercial & Enterprise Campus
Commercial & Enterprise Campus

Unifying indoor and outdoor backbones on a single mode standard to simplify long-term facility management.

Share: