FlexSHUFFLE™ 4x4 MPO Shuffle Assemblies

4x4 MPO mesh shuffle in a patch cord format, 32 fibre on MPO-8 or 64 fibre on MPO-16. Colour-identified upstream legs for each switch fabric, with no housing, cassette or rack space required.
  • 4x4 mesh shuffle, every MPO port reaches all four fabrics
  • Upstream legs colour coded blue, orange, green and brown per fabric
  • Patch cord format, no housing or cassette and no rack space consumed
  • Two fewer mated MPO connections than a cassette-based shuffle
  • Single-mode G.657.A1, MPO-8 APC (32 fibre) or MPO-16 APC (64 fibre)
  • Factory terminated and 100% IL/RL tested

Engineered to Outperform

Delivered with Certainty

Procurement Made Simple

Rapid Deployment Ready

Ready To Scale

Compliance Assured

FlexSHUFFLE™ 4x4 MPO shuffle assemblies build a full fibre mesh between four MPO ports and four upstream switch fabrics in a single pre-terminated cable. Each leg distributes its duplex lanes across all four legs on the opposite side, so every port reaches every fabric without a shuffle cassette, fibre-level patching or re-mapping in the field. Two builds are available: 32 fibre on MPO-8 connectors, and 64 fibre on MPO-16 for 800G and 1.6T switch ports.

The upstream legs are colour coded blue, orange, green and brown, following the TIA-598 order for positions 1 to 4. Each switch fabric is identified at a glance, which speeds up installation and removes guesswork during moves, adds and changes in dense leaf-spine and AI cluster fabrics.

FlexSHUFFLE™ is built in a patch cord format. There is no housing, cassette or panel to mount, and no rack space is consumed. The assembly routes through existing cable managers like any other patch cord, and removing the cassette also removes two mated MPO connections from every link, leaving more of the optical loss budget for the channel.

Assemblies use bend-insensitive single-mode G.657.A1 fibre with MPO-8 or MPO-16 APC connectors, and are factory terminated and 100% tested for insertion loss and return loss before shipment.

Intended for leaf-spine and AI cluster fabrics across the Sydney and Melbourne metropolitan data centre clusters, meshing four upstream switch fabrics in a patch cord format with colour-identified legs.
General
Configuration4x4 mesh shuffle (4 × MPO-8 to 4 × MPO-8, or 4 × MPO-16 to 4 × MPO-16)
Fibre Count32 fibres (8 per MPO-8 leg), or 64 fibres (16 per MPO-16 leg)
Lane MappingMesh, duplex: each leg distributes its duplex lanes across all four legs on the opposite side
Leg IdentificationUpstream legs colour coded blue, orange, green and brown (TIA-598 positions 1 to 4)
FormatPatch cord assembly, no housing, cassette or rack space required
Technical Specs
Fibre TypeSingle-mode G.657.A1
ConnectorsMPO-8 or MPO-16, Male and Female, APC polish
Connector Polish Angle8° APC (Angled Physical Contact)
Insertion Loss≤0.35 dB per MPO connector
Return Loss≥60 dB
Operating Temperature-20°C to +70°C
ComplianceTIA/EIA-568, RoHS, REACH
Single-mode (G.657.A1), MPO-8 APC, 4x4 Mesh Duplex
FSA-S7-32-4MP8F-4MP8M-MDFlexSHUFFLE™ Assembly, Single Mode (G.657.A1), 32 fibre, 4x4 MPO-8(Female) / MPO-8(Male), mesh, duplex
Single-mode (G.657.A1), MPO-16 APC, 4x4 Mesh Duplex
FSA-S7-64-4MP16F-4MP16M-MDFlexSHUFFLE™ Assembly, Single Mode (G.657.A1), 64 fibre, 4x4 MPO-16(Female) / MPO-16(Male), mesh, duplex